Adjusting the four-way lumbar support, Seats, steering wheel and mirrors, Seats – Mercedes-Benz 2011 E Class Sedan User Manual

Page 110

Advertising
background image

Adjusting the four-way lumbar

support

You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.

:

To raise the backrest contour

;

To soften the backrest contour

=

To lower the backrest contour

?

To harden the backrest contour

Folding bench seat in the cargo

compartment (Wagon)

The folding bench seat in the luggage
compartment is only suitable for persons no
more than 4.6 ft (1.40 m) tall and weighing a
maximum of 110 lb (50 kg).
Maximum permissible passenger weight may
be reduced by extensive optional extras and
vehicle load. Observe the maximum gross
vehicle weight and the gross axle weight
rating, which can be found on the vehicle
identification plate (

Y

page 385).

The combined cargo cover and net must be
installed if you are using the folding bench
seat (

Y

page 282).

G

Risk of injury

The rear seat backrests must be locked in the
upright position if you are using the folding
bench seat in the cargo compartment.
Do not pull away unless the head restraint in
the folding bench seat is installed correctly.
Make sure that the center of the head

restraint supports the seat occupant's head
at about eye level. This can reduce the risk of
injury to a child in the event of an accident.
Ensure that the seat belt is routed correctly
across the body and the seat belt buckle is
engaged.
Never leave children unsupervised in the
vehicle. This applies even if they are secured
in a child restraint system.
Secure children as recommended; see the
"Children in the vehicle" section.

G

Risk of injury

Only replace damaged covers with genuine
covers.
Make sure that items of luggage and other
objects in the cargo compartment are well
secured.
Otherwise, the load could cause injury in the
event of sharp braking, a sudden change in
direction or an accident.

Folding out the folding bench seat

X

Make sure that the backrests of the rear
bench seat are locked in the upright
position.

X

Move the handle for the combined cargo
cover and net upwards (

Y

page 282).

X

Pull release handle : and fold the
backrest of the folding bench seat
upwards.

108

Seats

Seats, steering wheel and mirrors

BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi

Version: 3.0.3.6

2010-05-20T13:33:46+02:00 - Seite 108

Advertising