Hold function, Driving and parking, Driving systems – Mercedes-Benz 2011 E Class Sedan User Manual

Page 190

Advertising
background image

Other vehicles changing lanes

DISTRONIC PLUS has not detected the
vehicle cutting in yet. The distance to this
vehicle will be too short.

Narrow vehicles

DISTRONIC PLUS has not yet detected the
vehicle in front on the edge of the road,
because of its narrow width. The distance to
the vehicle in front will be too short.

Obstructions and stationary vehicles

DISTRONIC PLUS does not brake for
obstacles or stationary vehicles. If, for

example, the detected vehicle turns a corner
and reveals an obstacle or stationary vehicle,
DISTRONIC PLUS will not brake for these.

Crossing vehicles

DISTRONIC PLUS may detect vehicles that
are crossing your lane by mistake. Activating
DISTRONIC PLUS at traffic lights with
crossing traffic, for example, could cause
your vehicle to pull away unintentionally.

HOLD function

General information

The HOLD function can assist the driver in the
following situations:

R

when pulling away, especially on steep
slopes

R

when maneuvering on steep slopes

R

when waiting in traffic

The vehicle is kept stationary without the
driver having to depress the brake pedal.
The braking effect is canceled and the HOLD
function deactivated when you depress the
accelerator pedal to pull away.

Activation conditions

You can activate the HOLD function if:

R

the vehicle is stationary.

R

the engine is running.

R

the driver's door is closed or if your seat
belt is fastened.

R

the parking brake is not applied.

188

Driving systems

Driving and parking

BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi

Version: 3.0.3.6

2010-05-20T13:33:46+02:00 - Seite 188

Advertising