Mercedes-Benz 2011 E Class Sedan - Manual (Page 111)

X Hook the seat belts into retainers =.
X Pull release handle ; and fold the folding
bench seat cushion into the sitting
position.
X Push down the seat cushion until the
backrest engages fully.
X Fold the head restraints upwards.
installing and removing the seat
cushion
You must remove the seat cushion if you wish
to lift the trunk floor, e.g. if the vehicle has a
flat tire.
X To remove: fold seat cushion ; upwards
and remove it from seat cushion
guides :.
X To install: guide seat cushion ; into seat
cushion guides : at a slight angle from the
rear =.
X Fold seat cushion ; back into its original
position ? until it engages.
Folding back the folding bench seat
X Pull the seat cushion upwards by tab :
and fold it back into its original position
until it engages.
X Press release button : and fold the head
restraints down.
Seats
109
Seats, steering wheel and mirrors
BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi
Version: 3.0.3.6
2010-05-20T13:33:46+02:00 - Seite 109
Z