Trailer load/noseweight, Maximum tire load, Direction of rotation – Mercedes-Benz 2011 E Class Sedan User Manual

Page 367: Uniform tire quality grading standards, Overview of tire quality standards, Tires and wheels

Advertising
background image

Trailer load/noseweight

The trailer load/noseweight affects the gross
weight of the vehicle. If a trailer is attached,
the trailer load/noseweight is included in the
load along with occupants and luggage. The
trailer load/noseweight is usually
approximately 10% of the gross weight of the
trailer and its cargo.
Your Mercedes-Benz is designed for
transporting persons and their luggage.
Mercedes-Benz does not recommend towing
a trailer with your vehicle.

Maximum tire load

G

Warning

Do not overload the tires by exceeding the
specified load limit as indicated on the Tire
and Loading Information placard on the
driver's door B-pillar. Overloading the tires
can overheat them, possibly causing a
blowout. Overloading the tires can also result
in handling or steering problems, or brake
failure.

i

The actual values for tires are specific to

each vehicle and may deviate from the
values in the illustration.

Maximum tire load : is the maximum
permitted weight for which the tire is
approved.
Further information on tire loads
(

Y

page 367).

Direction of rotation

Tires with a specified direction of rotation
have additional benefits, e.g. if there is a risk
of hydroplaning. You will only gain these
benefits if the correct direction of rotation is
observed.
An arrow on the sidewall of the tire indicates
its correct direction of rotation.
You may mount an emergency spare wheel/
spare wheel against the direction of rotation.
Observe the time restriction on use as well as
the speed limitation specified on the
emergency spare wheel/spare wheel.

Uniform Tire Quality Grading

Standards

Overview of tire quality standards

The Uniform Tire Quality Grading Standards
are U.S. government specifications. Their
purpose is to provide drivers with uniform
reliable information on tire performance data.
Tire manufacturers have to grade tires using
three performance factors: : tread
wear, ; tire traction, and = heat resistance.
All tires sold in North America are provided
with the corresponding quality class mark on
the sidewall of the tire, even though these
regulations do not apply to Canada.

i

The actual values for tires are specific to

each vehicle and may deviate from the
values in the illustration.

Uniform Tire Quality Grading Standards

365

Tires and wheels

BA 212 USA, CA Edition B 2011; 1; 5, en-US
dimargi

Version: 3.0.3.6

2010-05-20T13:33:46+02:00 - Seite 365

Z

Advertising