Subaru 2005 Forester 2.5X User Manual

Page 157

Advertising
background image

3-16

Instruments and controls

system continues to operate normally.
y

The warning light does not come on when the

ignition switch is turned to the “ON” position.
y

The warning light comes on when the ignition

switch is turned to the “ON” position, but it

does not go out even when the vehicle speed

exceeds approximately 8 mph (12 km/h).
y

The warning light comes on during driving.

If these occur, have the ABS system repaired at

the first available opportunity by your SUBARU

dealer.

With a vehicle equipped with an EBD system, the ABS

warning light comes on together with the brake system

warning light if the EBD system becomes faulty. For

further details of the EBD system fault warning, refer

to “Brake system warning light”.

NOTE

If the warning light behavior is as described be-

low, the ABS system may be considered normal.
y

The warning light comes on right after the en-

gine is started but goes out immediately, remain-

ing off.
y

The warning light remains on after the engine

has been started, but it goes out when the vehicle

speed reaches about 8 mph (12 km/h).
y

The warning light comes on during driving, but

it goes out immediately and remains off.

When driving with an insufficient battery voltage such

as when the engine is jump started, the ABS warning

light may come on. This is due to the low battery volt-

age and does not indicate a malfunction. When the

battery becomes fully charged, the light will go out.

„

Vehicle Dynamics Control warn-

ing light (if equipped)/Vehicle Dy-

namics Control OFF indicator

light (if equipped)

This warning light has the function of indicating faults

in the Vehicle Dynamics Control system and the func-

tion of indicating that the Vehicle Dynamics Control

system has been deactivated.

It comes on in the event of a fault in the system and is

on when the system is not operating.

This warning light comes on when the ignition switch

is turned to the “ON” position and goes out after the

engine has started. It indicates that the Vehicle Dy-

namics Control system is in normal operation.

T Vehicle Dynamics Control warning light
The Vehicle Dynamics Control system is probably in-

Advertising