Subaru 2005 Forester 2.5X - Manual (Page 453)

13-4
Consumer information and Reporting safety defects
(2) Tire Size
(3) Tire Type Code
(4) Date of Manufacture
The first two figures identify the week, starting
with “01” to represent the first full week of the cal-
endar year; the second two figures represent the
year. For example, 0101 means the 1st week of
2001.
T Other markings
The following makings are also placed on the
sidewall.
V Maximum permissible inflation pressure
The maximum cold inflation pressure to which
this tire may be inflated. For example, “300 kpa
(44 PSI) MAX. PRESS”
V Maximum load rating
The load rating at the maximum permissible
weight load for this tire. For example, “MAX.
LOAD 670 kg (1477 LBS) @ 300 kpa (44 PSI)
MAX. PRESS.”
Maximum load rating applies only to the
tire, not to the vehicle. Putting a load rated
tire on any vehicle does not mean the vehi-
cle can be loaded up to the tire’s rated
load.
V Construction type
Applicable construction of this tire.
For example, “TUBELESS STEEL BELTED RA-
DIAL”
V Construction
The generic name of each cord material used in
the plies (both sidewall and tread area) of this
tire.
For example, “PLIES: SIDEWALL POLYESTER
1 TREAD POLYESTER 1 + STEEL 2 + NYLON
1”
V Uniform Tire Quality Grading (UTQG)
For details, refer to “Uniform tire quality grading
standards” in this chapter.