Engine oil – Subaru 2005 Forester 2.5X User Manual
Page 375
Advertising
11-10
Maintenance and service
Engine oil
Checking the oil level
Check the engine oil level at each fuel stop.
1. Park the vehicle on a level surface and stop the en-
gine.
2. Pull out the dipstick, wipe it clean, and insert it
again.
3. Be sure the dipstick is correctly inserted until it
stops with the graphic symbol “
” on its top ap-
pearing as shown in the illustration.
A) Notch
B) Upper level
C) Lower level
4. Pull out the dipstick again and check the oil level on
it. If it is below the lower level, add oil to bring the level
up to the upper level.
y
Use only engine oil with the recommended
grade and viscosity.
y
Be careful not to spill engine oil when adding
it. If oil touches the exhaust pipe, it may cause
HSB018BA
A
B
C
UGB082BC
Advertising