Engine coolant – Subaru 2005 Forester 2.5X User Manual

Page 382

Advertising
background image

11-17

Maintenance and service

CONTINUED

„

Engine coolant

T Checking the coolant level

A) “FULL” level mark
B) “LOW” level mark

Check the coolant level at each fuel stop.

1. Check the coolant level on the outside of the reser-

voir while the engine is cool.

2. If the level is close to or lower than the “LOW” level

mark, add coolant up to the “FULL” level mark. If the

reserve tank is empty, remove the radiator cap and re-

fill as required.

A) Rubber gaskets

3. After refilling the reserve tank and the radiator, re-

install the caps and check that the rubber gaskets in-

side the radiator cap are in the proper position.

y

Be careful not to spill engine coolant when

adding it. If coolant touches the exhaust pipe, it

may cause a bad smell, smoke, and/or a fire.
y

Do not splash the engine coolant over paint-

ed parts. The alcohol contained in the engine

HSB018CC

A

B

A

HSB026BC

Advertising