Subaru 2005 Forester 2.5X - Manual (Page 217)

5-14
Audio
T To start playback
When the “CD” button (16) is pressed, the CD changer
will start playback. The display shows the current disc
number, track number and the elapsed time during
playback.
NOTE
y If a disc is in the player, the “DISC” button is
used to change from CD player operation to DISC
changer operation. Each time the “DISC” button is
pressed, the operating mode will change alter-
nately.
y
At the end of the disc, the player automatically
continues with the next disc.
y
After playback on the last disc finishes, play-
back will automatically return to the first disc.
y
If you have loaded fewer than 6 discs, any miss-
ing disc is automatically skipped.
T Selection of a desired disc
You can select a desired disc from among the discs
contained in the CD changer only by pressing the cor-
responding number on one of the disc select buttons.
If you are to listen to the 5th disc in the CD changer,
press the “5” button of the disc select buttons. All other
discs in the CD changer can also be selected in a sim-
ilar way.
NOTE
y No disc change takes place if the button corre-
sponding to the storage tray in which no disc is
loaded is pressed.
y
If the disc select button corresponding to the
disc now in playback is pressed again, the disc
will be replayed from its beginning.
T To select a song from its beginning
V Forward direction
Briefly press the “
” side of the button (17) to skip
to the beginning of the next track. Each time this side
of the button is pressed, the indicated track number
will increase.
V Backward direction
Briefly press the “
” side of the button (17) to skip
to the beginning of the current track. Each time this
side of the button is pressed, the indicated track num-
ber will decrease.
T Fast-forwarding and fast-reversing
V Fast-forwarding
Press the “
” side of the button (17) continuously
for more than 1 second to fast-forward the disc.
Release the button to stop fast-forwarding.
If you continue fast-forwarding to the end of the disc,