Subaru 2004 Forester X - Manual (Page 132)

3-3
Instruments and controls
– CONTINUED –
The key can be turned from “ACC” to “LOCK” only
when the selector lever is in the “P” position.
Manual transmission vehicles
The key can be turned from “ACC” to “LOCK” only
when the key is pushed in while turning it.
Never turn the ignition switch to “LOCK” while
the vehicle is being driven or towed because
that will lock the steering wheel, preventing
steering control. And when the engine is turned
off, it takes a much greater effort than usual to
steer.
ACC
In this position the electrical accessories (radio, ac-
cessory power outlet, etc.) can be used.
ON
This is the normal operating position after the engine
is started.
START
The engine is started in this position. The starter
cranks the engine to start it. When the key is released
(after the engine has started), the key automatically
returns to the “ON” position.
Do not turn the ignition switch to the “START”
position while the engine is running.
Key reminder chime
The reminder chime sounds when the driver’s door
HS2020DA