Engine oil, Checking the oil level – Subaru 2004 Forester X User Manual

Page 353

Advertising
background image

11-10

Maintenance and service

Engine oil

Checking the oil level

Check the engine oil level at each fuel stop.
1. Park the vehicle on a level surface and stop the en-
gine.

2. Pull out the dipstick, wipe it clean, and insert it
again.
3. Be sure the dipstick is correctly inserted until it
stops with the graphic symbol “

” on its top ap-

pearing as shown in the illustration.

1) Notch
2) Upper level
3) Lower level

4. Pull out the dipstick again and check the oil level on
it. If it is below the lower level, add oil to bring the level
up to the upper level.

Use only engine oil with the recommended

grade and viscosity.

Be careful not to spill engine oil when adding

it. If oil touches the exhaust pipe, it may cause

HSB018BA

1

2

3

UGB082BB

Advertising
This manual is related to the following products: