Air cleaner element – Subaru 2004 Forester X User Manual

Page 363

Advertising
background image

11-20

Maintenance and service

ator cap is correctly in place.
8. Start and run the engine for more than five minutes
at 2,000 to 3,000 rpm.
9. Stop the engine and wait until the coolant cools
down (122 to 140

° F [50 to 60° C]). If there is any loss

of coolant, add coolant to the radiator’s filler neck and
to the reserve tank’s “FULL” level.
10.Put the radiator cap and reservoir cap back on and
tighten firmly.

Air cleaner element

The air cleaner element functions as a filter screen.
When the element is perforated or removed, engine
wear will be excessive and engine life shortened.

The air cleaner element is a viscous type. It is unnec-
essary to clean or wash the element.

Do not operate the engine with the air cleaner
element removed. The air cleaner element not
only filters intake air but also stops flames if the
engine backfires. If the air cleaner element is
not installed when the engine backfires, you
could be burned.

Replacing the air cleaner element

Non-turbo models

Replace the air cleaner element according to the
maintenance schedule in the “Warranty and Mainte-
nance Booklet”. Under extremely dusty conditions, re-
place it more frequently. It is recommended that you
always use genuine SUBARU parts.

Advertising
This manual is related to the following products: