Subaru 2004 Forester X - Manual (Page 148)

3-19
Instruments and controls
– CONTINUED –
Headlight flasher
To flash the headlights, pull the lever toward you and
then release it. The high beam will stay on for as long
as you hold the lever. The headlight flasher works
even though the lighting switch is in the “OFF” posi-
tion.
When the headlights are on high beam, the high beam
indicator light “
” on the instrument panel also
comes on.
Do not hold the lever in the flashing position for
more than just a few seconds.
Daytime running light system
The tail lights, parking lights, and side marker
lights are not turned on by the daytime running
light system. The light switch must always be
turned to the “
” position when it is dark
outside.
The low beam headlights will automatically come on at
reduced brightness when the engine has started, un-
der the following conditions:
The parking brake is fully released.
The light switch is in the “OFF” or “
” position.
The automatic transmission selector lever is set at
other than the “P” position.
HS3026DA