Cooling fan, hose and connections, Engine coolant – Subaru 2004 Forester X User Manual

Page 359

Advertising
background image

11-16

Maintenance and service

Cooling fan, hose and connections

Your vehicle employs an electric cooling fan which is
thermostatically controlled to operate when the engine
coolant reaches a specific temperature.
If the radiator cooling fan does not operate even when
the engine coolant temperature gauge exceeds the
normal operating range, the cooling fan circuit may be
defective. Check the fuse and replace it if necessary.
If the fuse is not blown, have the cooling system
checked by your SUBARU dealer.

If frequent addition of coolant is necessary, there may
be a leak in the engine cooling system. It is recom-
mended that the cooling system and connections be
checked for leaks, damage, or looseness.

Engine coolant

Checking the coolant level

1) “FULL” level mark
2) “LOW” level mark

Check the coolant level at each fuel stop.
1. Check the coolant level on the outside of the reser-
voir while the engine is cool.
2. If the level is close to or lower than the “LOW” level
mark, add coolant up to the “FULL” level mark. If the
reserve tank is empty, remove the radiator cap and re-
fill as required.

HSB018CB

1

2

Advertising
This manual is related to the following products: