Subaru 2004 Forester X - Manual (Page 298)

8-19
Driving tips
– CONTINUED –
To remove the crossbar
0
1) Crossbar end support
2) T-30 torx® head screw
1. Loosen and remove the T-30 torx® head screw
from the top of each crossbar end support.
2. Move the end support and inner clamp to unhook
each side of the crossbar from the roof rail.
3. Carefully raise the crossbar from roof rails.
NOTE
It may be necessary to move the Front crossbar
rearward, near the center of the roof rail for easier
removal. Use care not to cross-thread the screw in
the insert if it has been removed.
To install the crossbar
Front crossbar:
Front crossbar has 150 LBS. Load Label on right-hand
side.
1
2
HS8028BB
HS8025BA