Subaru 2003 Impreza - Manual (Page 150)

IMPREZA(NA) A1850BE-A (ENGLISH)
3
Instruments and controls
3-29
– CONTINUED –
n Compass zone adjustment
Compass calibration zones
1. The zone setting is factory preset to Zone 8. Re-
fer to the “Compass calibration zone” map shown
above or one attached to the end of this manual to
verify that the compass zone setting is correct for
your geographical location.
2. Press and hold the right button for 3 seconds
then release, and the word “ZONE” will briefly ap-
pear and then the zone number will be displayed.
3. Press the right hand button repeatedly to cycle
the display through all possible zone settings. Stop
cycling when the correct zone setting for your loca-
tion is displayed.
4. Releasing the button for 3 seconds will exit the
zone setting mode.
J Outside mirrors
B Convex mirror (passenger side)
WARNING
Objects look smaller in a convex mirror and
farther away than when viewed in a flat mirror.
Do not use the convex mirror to judge the dis-
tance of vehicles behind you when changing