Subaru 2003 Impreza - Manual (Page 43)

IMPREZA(NA) A1850BE-A (ENGLISH)
Seat, seatbelt and SRS airbags
1-18
n Adjusting the front seat shoulder belt anchor
height
The shoulder belt anchor height should be adjusted
to the position best suited for you.
To lower the anchor height, push the release button
and slide the anchor down.
To raise the anchor height, slide the anchor up. Pull
down on the anchor to make sure that it is locked in
place.
Always adjust the anchor height so that the shoulder
belt passes over the middle of the shoulder without
touching the neck.
WARNING
When wearing the seatbelts, make sure the
shoulder portion of the webbing does not
pass over your neck. If it does, adjust the
seatbelt anchor to a lower position. Placing
the shoulder belt over the neck may result in
neck injury during sudden braking or in a col-
lision.
n Unfastening the seatbelt
Push the button on the buckle.
Before closing the door, make sure that the belts are