Subaru 2003 Impreza - Manual (Page 190)

IMPREZA(NA) A1850BE-A (ENGLISH)
5
Audio
5-23
– CONTINUED –
NOTE
D Only use good quality cassettes (cassettes
longer than C-90 are not recommended).
D Put cassettes back in their boxes immediately
after use to protect them from dust and dirt and
to prevent the tape from unwinding.
D Never expose cassettes to heat, direct sunlight
or moisture.
D Clean the tape head (once or twice a month)
using a wet-type cleaning cassette.
B To play back a cassette tape
n When cassette tape is not in the player
When a cassette is partially inserted, it is automati-
cally drawn in and starts tape playback.
n When cassette tape is in the player
When the “TAPE” button (12) is pressed, the display
will show “PLAY” and the player will start playback.
B Tape travel indicators
These indicate the direction the cassette tape is
moving.
" : indicates that the top side of the cassette is be-
ing played back.
A : indicates that the bottom side of the cassette is
being played back.
B Program switching button (PROG)
When the program switching button “PROG” (16) is
pressed during playback, the tape travel indicators
will switch and the player will begin playing back the
opposite side of the tape. The same mechanism is
automatically activated when the end of the tape is
reached. This allows the opposite side of the tape to
play, providing continuous playback.
B Fast-forward button (FF)
To fast-forward the tape, press the “FF” button (15).
The display will show “FF”. To stop fast-forwarding,
press the “FF” or “TAPE” (12) button.
B Rewind button (REW)
To rewind the tape, press the “REW” button (17).
The display will indicate “REW”. To stop rewinding,
press the “REW” or “TAPE” (12) button.
B Eject button ( )
When “ ” button (10) is pressed, play back stops
and the cassette tape is ejected.
The ejection function also operates when the ignition
switch is in the “LOCK” position. Always make cer-
tain that you remove the cassette tape.