Subaru 2003 Impreza User Manual

Page 160

Advertising
background image

IMPREZA(NA) A1850BE-A (ENGLISH)

4

Climate control

4-7

– CONTINUED –

B Heating and defrosting

To direct warm air toward the floor and the wind-
shield:
1. Set the air inlet selection lever to the “

position.
2. Set the air flow control dial to the “

” position.

3. Set the temperature control dial to the most com-
fortable level.
4. Set the fan speed control dial to the desired
speed.
If your vehicle is equipped with an air conditioner,
when the “

” or “

” position is selected, the

air conditioner compressor automatically operates
regardless of the position of the air conditioner but-

ton to defog the windshield quickly.
However, the air conditioner indicator light does not
come on at this time.

NOTE

Warm air also comes out from the right and left
air outlets. To stop warm air flow from these out-
lets, turn the corresponding knob clockwise.

B Heating

To direct warm air toward the floor:
1. Set the air inlet selection lever to the “

position
2. Set the air flow control dial to the “

” position.

Advertising