Subaru 2003 Impreza - Manual (Page 372)

IMPREZA(NA) A1850BE-A (ENGLISH)
11
Maintenance and service
11-49
– CONTINUED –
J Wheel covers
B Removing the wheel cover
Insert the wheel cover remover into the notch pro-
vided, and pry the wheel cover off.
B Installing the wheel cover
Align the valve with the valve hole in the cover, then
fit the cover on the wheel by tapping your hand
evenly around the circumference of the cover.
NOTE
When any of the wheels is removed and replaced
for tire rotation or to change a flat tire, always
check the tightness of the wheel nuts after driv-
ing approximately 600 miles (1,000 km). If any
nut is loose, tighten it to the specified torque.