Subaru 2003 Impreza User Manual
Page 200
IMPREZA(NA) A1850BE-A (ENGLISH)
5
Audio
5-33
– CONTINUED –
will be ejected and the indicator light will begin
blinking.
3. To remove another disc, repeat step 1 and 2
choosing a different “Disc select” button.
(To remove discs when the ignition switch is in the
“Lock” position, press the “Eject” button, and the
first disc will be ejected. Press the “Eject” button
again, and the next disc will be ejected and so on.
At this time, the “Disc select” buttons are disabled.)
B To remove all discs at one time
1. Press and hold the “Eject” button (4) until all
“Disc” indicators begin blinking (about 1.5 se-
conds), and the first disc will be ejected.
2. When the disc is removed, the next one will be
ejected, and so on.
B To replace a playing disc with another
Simply press the desired one of “Disc select” but-
tons (3) (numbered from 1 to 6) or press the “DISC
select” button on the radio unit to select the desired
disc, and the disc will begin to play.
B Disc indicators
Lit: when the corresponding storage tray is occu-
pied by a disc.
Blinking: Disc player is either in loading, eject or
changing mode.
OFF: No disc is loaded or the ignition switch is in the
“LOCK” position.
n Open/Closed disc slot indicator
When the disc slot is open, the disc indicators on
both sides of the slot illuminate.
B Function control
Refer to CD changer control operating instructions
described in the “Type B audio set” section.