ABUS Technologies Log Box-DA Data Logger - Manual (Page 24)

ABUS TECHNOLOGIES INC.
24
Log Box-DA
8. MAINTENANCE
8.1 Observation
1. The logger is an electronic device and some basic care is required:
2. When opening the device for battery replacement or connecting sensors avoid
touching the circuit for not causing damages resulting from static electricity.
3. When the device is opened, avoid liquid and/or dust contact.
4. Use a screwdriver to open the case cover.
5. Pay attention to batteries polarity: The positive terminal should be placed directed
towards the center of the device.
6. Worn batteries should not be recharged, dismantled or incinerated. After use,
batteries must be disposed according to local legal rules or returned to ABUS.
7. After placing batteries back to the logger, make sure the cover is firmly attached to
the socket.
8.2 Troubleshooting
FAULT POSSIBLE CAUSE RESOLUTION
LED is not
Flashing
1. The LED flashing light is
intentionally weak, and it can be
difficult to see it in illuminated
environments.
2. Make sure it is not flashing at all.
1. Make sure the battery is installed
correctly;
2. Make sure the battery is not
discharged;
No
Communication
Communication with the logger fails
1. Make sure the COMM port is
selected correctly and there is no
other program using the same port
during communication attempts;
2. Make sure there is no physical
obstacle blocking the infrared
signal;
3. Make sure the cable is well
connected to the PC port;
4. Make sure the port selected does
not present any problem;