CIRCUTOR DHB Series - Manual (Page 40)

40
Bit 11 Bit 10
Meaning
0 0 voltage output 0...10 V
0 1 current output 0...20 mA
1 0 current output 4...20 mA
1 1 lack of calibration of analog output
Bit-9 - „1” - the interval of frequency averaging does not elapse
Bit-8 - „1”- the interval of voltage averaging does not elapse
Bit-7 - „1”- the interval of active power averaging does not elapse
Bit-6 - „1”- too small voltage,current for power factor measurement,
tg(fi), fi
Bit-11, bit 10 analog output
Bit-5 - „1” - exceeded the upper range
Bit-4 - „1” - exceeded the lower range
Bit-3- „1” - alarm 4 switching (relay)
Bit-2 - „1” - alarm 3 switching (relay)
Bit-1- „1” - alarm 2 switching (relay)
Bit-0- „1” - alarm 1 switching (relay)