Crompton Controls M10 - Manual (Page 6)

4 Safety Emotron AB 01-2550-01r3
2 Safety
• Read this manual thoroughly before installing and using the
Emotron M10.
• The Emotron M10 must be installed by qualified personnel.
• Always disconnect supply circuits prior to installation.
• The installation must comply with standard and local regulations.
• Pay special attention to the information in this chapter and the parts marked
WARNING and CAUTION in the chapter on operation.
• Check that the Emotron M10 and the equipment are correctly connected
before use.
• Should questions or uncertainties arise, please contact your local sales outlet
or see Chapter 11 page 26, Service.
• Faults that arise due to faulty installation or operation are not covered by the
warranty.
NOTE: Removing or tampering with the seal on the housing will invalidate
the warranty.