Junger Audio d06 - Digital Audio Leveler - Manual (Page 36)

5. OPERATION
operation manuad d06, chapter 5 - Operation - page 6 of 12
GPI
GPI 1 to GPI 8 :
you can assign each physical GPI input one function
by moving the slider across the input field.
The options are:
PRESET-1 to PRESTE-4 (loads assigned preset)
STEREO (turns the link mode = On)
DIGITAL (selects the digital input)
BYPASS (activates the bypass relay)
GPO
GPO 1 to GPO 8 :
you can assign each physical GPO (Tally) one status
by moving the slider across the input field.
The options are :
PRESET-1 to PRESET-4 (is selected)
STEREO (link mode is selected)
LIMITER (activity of the limiter)
CLIP (input signal is clipping)
DIGITAL (input is active)
BYPASS (relay is active)
The LAN Controller of the d06 provides its own menu. You must press the
<CONTROLLER> soft button:
5.1.5
GPI/O set up
5.1.6
LAN Controller
set up