Junger Audio d06 - Digital Audio Leveler - Manual (Page 41)

5. OPERATION
operation manual d06, chapter 5 - Operation - page 11 of 12
From this moment on, there is no communication with the LAN Controller
possible. If the progress bar comes to its end, the browser will restart
communication with the LAN Controller and you will get a message that the
process has finished :
MODULE FIRMWARE BULK UPDATE
The image file also carries the actual firmware files for
the DSP and the DSP Controller. This function offers
you an update of both components. When you press
the soft button, the LAN Controller reads the installed
versions and compares it with the release version it
has “on board”. You will get a display to make a
choice if you want to update :
For the above example there is no update needed.
(C8702 is the internal label for the LAN controller).
MODULE FIRMWARE SINGLE UPDATE
If there is the need to update one of the components
by a firmware that is not “on board” of the LAN
Controller, you may use this function. It offers you
either to update the (DSP) Controller and/or the DSP.
The firmware file must be provided from the file
system of the PC.
REBOOT CONTROLLER
This function allows you to reboot the LAN Controller.
5.1.6.4
Reboot the
LAN Controller