KLING & FREITAG K&F CA 1515-9 - SP - Manual (Page 22)

User's Manual ‘SP’ Models based upon the CA Series
KLING & FREITAG GMBH ©2003 - 2014 Version 7.1, 09.09.2014 Page 22 of 52
9.1.2 Full-Range Mode with Subwoofer
You can link the input signal (for example from the mixer) from one loudspeaker to
another. It makes no difference whether the input signal reaches the bass speaker first
and is then transmitted to the mid-high speaker or the other way around.
The switch ‘FILTERS’ on
the SP speaker must be
at ‘ON’ in this mode.
If you are operating a mid-range system in a cluster (speakers arranged in close prox-
imity) reduce the frequencies below 300 Hz by 3-4 dB! (The K&F System Controllers
have a special ‘Top Low Cut’ filter function for this purpose.)
INPUT
Channel 2
Channel 1
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Bass
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Bass