KLING & FREITAG K&F CA 1515-9 - SP - Manual (Page 9)

User’s Manual ‘SP’ Models based upon the CA Series
KLING & FREITAG GMBH ©2003 - 2014 Version 7.1, 09.09.2014 Page 9 of 52
Modes of Operation
− Operations without external controller:
with activated filters (FILTERS ‘ON’), all K&F models in the ‘SP Series’ are combina-
ble with one another by simply linking the signal from one speaker to the next.
− With optional K&F System Controller*:
via a K&F System Controller CD 44, CD 24 (discontinued) or C2 (discontinued ,
with system plug-in card) or an Audio DSP*
− if used with BSS Soundweb, FDS 366, 336, 334, and XTA DP 226, 224, K&F sys-
tem parameters are available upon request
* The operation of the K&F ‘SP’ models with K&F System Controller or Audio DSP is
recommended for uses in which special filter presets are advisable, i.e. in combination
with passive systems of the ‘CA Series’, in cluster operations (top low cut), when bass
and high boost are necessary, adjustment to the room acoustics (EQ), etc.
The following K&F ‘SP’ speakers are available:
Full-range systems: CA 1001 - SP,
CA 1201 - SP,
CA1215-6 - SP, CA 1215-9 - SP
CA 1515-6 - SP, CA 1515-9 - SP
LINE 212-6 - SP, LINE 212-9 --- SP
Subwoofers:
SW 112 - SP, SWi 112 - SP,
SW 115E - SP, SWi 115E - SP,
SW 118E - SP, SWi 118E - SP,
SW 215E - SP