Saturn ST-EC1775 Leda - Manual (Page 5)

8
You must decide how long it will be before your bread is ready by pressing the “ ”or
“ ”. Please note the delay time should include the baking time of program. That is, at
the completion of delay time, there is hot bread can be serviced. At first the program and
degree of browning must be selected, then pressing “ ”or “ ”to increase or decrease
the delay time at the increment of 10 minutes. The maximum delay is 13 hours.
Example: Now it is 6:30p.m, if you would like your bread to be ready in the next morning
at 7 o’clock, i.e. in 10 hours and 30 minutes. Select your menu, color, loaf size then press
the “ ”or “ ” to add the time until 10:30 appears on the LCD. Then press the
STOP/START button to activate this delay program. You can see the dot flashed and
LCD will count down to show the remaining time. You will get fresh bread at 7:00 in the
morning, If You don’t want to take out the bread immediately, the keeping warm time of
1hour starts.
Note: For time delayed baking, do not use any easily perishable ingredients such as
eggs, fresh milk, fruits, onions, etc.
KEEP WARM
Bread can be automatically kept warm for 60 minutes after baking. If you would like to
take the bread out, switch the program off with the START/STOP button.
MEMORY
If the power supply has been broken off during the course of bread making, the process of
bread making will be continued automatically within 15 minutes, even without pressing
Start/stop button. If the break time exceeds 15 minutes the memory cannot be kept and the
bread maker must be restarted，But if the dough is no further than the kneading phase
when the power supply breaks off, you can press the “START/STOP” straight to continue
the program from the beginning .
ENVIRONMENT
The machine may work well in a wide range of temperatures, but there could be a
difference in loaf size between a very warm room and a very cold room. We suggest the
room temperature should be between 15 and 34 .
9
WARNING DISPLAY:
1.If the display shows “H:HH” after the program has been started, (see below figure 1) the
temperature inside is still too high. Then the program has to be stopped. Open the lid
and let the machine cool down for 10 to 20 minutes.
2.If the display shows “E:EE” after you have pressed START/STOP, (see below figure
2) the temperature sensor is disconnected please check the sensor carefully by
Authorized expert.
LI GHT MEDI UM DARK LI GHT MEDI UM DARK
Figure 1 Figure 2
For the first use
1、Please check if all parts and accessories are complete and free of damage .
2、Clean all the parts according to the latter section “Cleaning and Maintenance”
3、Set the bread maker in baking mode and bake empty for about 10 minutes.
After cooling it down clean once more.
4、Dry all parts thoroughly and assembly them, so the appliance is ready for using.
How to make bread
1. Place the pan in position, then turn it clockwise until they click in correct position. Fix
the kneading blade onto the drive shafts. Turn the kneaders clockwise until they click
into place. It is recommended to fill holes with heat-resisting margarine prior to placing
the kneaders, this avoids the dough to stick below the kneaders and the kneaders could
be removed from bread easily.
2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe.
℃ ℃
750 g 900 g 750 g 900 g