Supreme Audio SupremeAudio NAVIGATOR Series 7000 - Manual (Page 13)

12
Before Using the System
1. The AC/DC switch is automatic and built inside the system. Before using AC power,
please note that the voltage is at 100-240V. Connect the AC power cord from the AC IN (G3)
to the outlet.
2. For first time use, please charge the battery over 8 hrs, to maintain the good quality and
operation of the battery. When charging, the charging indicator (G2) lights RED. When
charging is almost full, the indicator will flash Red and Green. After the battery is fully
charged, the indicator lights Green.
3. This system has an auto protection circuit for the battery. It will protect the battery from
being overcharged and overused. When the power switch LED (G1) lights red, it shows that
the 30% of power is left. When the power switch keeps flashing, the system will turn off
automatically to protect the battery.
Installation and Operation of Portable Sound System
A. Wireless Mic. Receiver (Please see page 7)
This system can be built with one or two receivers. The channels are selectable.
1. Turn the power switch (A7) clockwise to turn on the receiver.
2. The LCD display (A1) will show “On” and then the channel last used.
3. To select the channel, press the SET button (A5) and the channel will flash in the LCD
window. Press the UP or DOWN button (A6) to select the desired channel, and then press
ENTER to set the channel.
4. Turn the volume control to the desired position.
5. When receiving the signals, the A/B diversity indicator (A2) will light RED or Green to
show the diversity condition. The RX indicator (A3) will show the receiving condition and
the AF indicator (A4) will show the audio level condition.
B. Anti-Shock CD/MP3 Player (Please see the page 7)
1. Push the power (B2) to turn on the player. Put the CD in the CD slot (B10) or push
Stop/Eject button (B5) to take out the CD inside the slot.
2. Press Play/Pause button (B8) and turn the volume control (B9) clockwise to start or pause
the playing, and adjust the proper volume. And then push Stop/Eject button to stop or
change the CD or MP3 disc.