Supreme Audio SupremeAudio NAVIGATOR Series 7000 User Manual
Page 19
18
D. Frequency Settings:
1. Press SET for about 2 seconds.
2. The LCD panel will turn bright and keep flashing.
3. Channel can be increased when pressing the UP button.
4. Channel can be decreased when pressing the DOWN button.
5. To confirm the channel desired, click the SET button again.
E. Meaning of LCD Indicator:
1.
: When the battery shows three bars, the microphone is fully charged.
2.
: When there is only one bar, the microphone is not fully charged.
3.
: When there are no bars showing in the battery graphic, this microphone
will be turned off automatically after flashing three times.
F. Battery Charging Steps:
1. Two rechargeable NiMH AA 1.2V batteries are required for this microphone. Batteries
must be 2100mAh or lower rated amperage.
2. It is best to use the adapter SupremeProAudio offers. The adapter output is DC 5V, the
correct voltage to charge the microphone properly.
3. Charging status:
a.
If indicator for battery is flashing: That means that Non-Rechargeable
batteries have been inserted . Please check batteries and use
rechargeable batteries.
b. The If indicator for battery is flashing and bright LCD: Failing, rusted or
over-heated batteries are being used.
c.
The If indicator for battery show up accordingly: Batteries are charging
correctly.
d.
If indicator looks like this: Batteries have been fully charged.
* Please note the microphone will turn off automatically while charging.