Supreme Audio SupremeAudio NAVIGATOR Series 7000 - Manual (Page 17)

16
4. If you want to fit in Audio-Link module, or you don’t have any additional module, switch
the module switch (SW200) to NORMAL.
5. When installing the ECHO module, plug the power cable to the connector J201(07P) and
the signal cable to connector COM204.
6. When installing the Audio-Link module, plug the power cable to the connector J201(07P)
and the signal cable to connector J204.
7. Screw in the panel to finish the module installation.
J204
CON204
J201(07P)
EFFECT NORMAL
SW20 0
C o nn e c t to (J20 4)
Co nn e c t to (J20 1)