TabletKiosk eo a7330 Ultra-Mobile - Manual (Page 45)

30 Chapter 04: Using Your eo a7330 with Windows
Calibrating the Touch Screen
Tapping the “Calibrate...” button will initiate the system’s touch
screen calibration routine. Simply follow the instructions that
appear on screen and tap the center of the targets with your
finger. When done, tap the “Finished” button to accept your
calibration input and exit, tap “Try Again” to redo the calibration
routine, or tap “Cancel” to quit without saving the new calibra-
tion information.
TIP: A quick way to access the both the Touch Screen and Digitizer
(a7330D only) calibration routine is to use the “Pen” screen in the
“Panel Control Center”. Simply press and hold on the icon in the
system tray to bring up the “Launch Button Quickshow” menu. Tap the
“Configure...” button to open the Panel Control Center and then tap
the “Pen” button. Tap the “Configure...” button and choose the input
screen to wish to calibrate.
Digitizer Settings and Calibration (a7330D only)
Wacom’s “Pen Tablet Properties” Control Panel allows you to
customize the behavior of the Stylus Pen as well as calibrate the
digitizer for more accurate input.
1. Go to the START Menu and tap on
“Control Panel” in the right hand
column.
2. From the Control Panel window,
double-tap on the “Pen Tablet
Properties” icon to open the
control panel.