User manual “rsd - 7118 – Televes FTA Satellite receiver w/modulator User Manual

Page 46

Advertising
background image

User Manual

“RSD - 7118”

46

In the event of a failure in the power supply, either because the satellite receiver has been unplugged or there has
been an outage, when the receiver has been plugged into the mains again and power is flowing, the TV/Radio
channel that had been tuned in at the time of the blackout will appear again automatically on screen with the last
Audio selected.

5.13.- Return to previous channel with auto-save

If you want to return to the last channel you were viewing and do not remember what number it was, press the

button.

5.12.- Call to previous channel

If you want to freeze an image on screen while you are viewing a program, press the PAUSE button. To go on vie-
wing the program, press the PAUSE button again.

Bear in mind that while you freeze an image on screen, the channel you were viewing continues with its transmis-
sion, due to which you will lose the part of the transmission that took place while your frozen image was on screen.

5.14.- Image freezing

5.11.- Mosaic Function

This function enables you to view a mosaic-type picture formed by a group
of channels shown on nine small screens.

Press the M/P button to enable this option. Once the mosaic image is
displayed on screen, it is possible to choose a channel to view using the
V+, V-, CH

or CH

buttons.

By pressing the OK button on the selected picture, this will be shown
full-screen size.

NOTE: This function does not enable the simultaneous viewing of two

programs.

5.10.- ZOOM Function

This function enables you to magnify a selected area on the image that you
are viewing.

To enable this function, press the ZOOM button. A small schematic of
the screen will be displayed, indicating the level of magnification and the
area being shown.

Each time you press the ZOOM button, the zoom factor doubles, up to a
maximum of 16X.

To move the magnification zone through the rest of the picture, use the
V+, V-, CH

and CH

buttons.

Press the EXIT button to leave Zoom.

NOTE: Bear in mind that as you go increasing the zoom factor, the quality of

the image will worsen.

7118_005_ES-UK:7116_000_ES-UK.qxd 13/03/2012 8:25 Página 46

Advertising