Setting up the coaxdata home wifi – Televes COAXDATA GATEWAY 1Gbps User Manual
Page 12
Data Over Coax Gateway
Ref.769301
Setting up the CoaxData Home WiFi
Setting up of the product
The configuration of the device has to be carried out by means of a web browser.
Connect a device with a web browser to the CoaxData Home Wifi and access the IP adress :
http://172.16.0.1
Default user is. Admin and default password is : Televes1.
Remenber to change these parameters through the configuration options on the Device
management section.
Should you have forgotten Username and / or Password please reset the equipment to factory
configuration and reconfigure it.
Device status
•
Device Information
: Information about firmware and hardware version on the product.
Network Information
:
Shows network information of the device. This information is related to the selected working mode of the
product.
•
AP Bridge mode
: The device will work as an ethernet bridge on the three interfaces
Coaxial/PLC-Ethernet-WiFi.
EN
www.televes.es