Tempest TornadoRetrofit Kits - Manual (Page 16)

Tornado Enclosure User Manual
page 16
Digital Enclosure Control – DEC3.2 TM
DEC3.2 TM – that’s Digital Enclosure Control, third Generation, revision 2 – is the brain of your
Tempest enclosure. It will maintain the internal environment in a comfortable temperature and
humidity range, and prevent condensation – the real killer of outdoor equipment. DEC3.2
monitors internal temperature, humidity and lamp current at all times, and uses this information
to control the enclosure’s lamp relay, fan(s) and heater(s). It can report back over the DMX cable,
using the RDM protocol (Remote Device Management) if desired.
Unless otherwise specified, this version of the user guide refers to DEC3.2 units fitted with software version
0.1.xxx or later.
Lamp
Heater Fan Relay On DMX Temp
ESC OK