WaveWare comPPage PIA-3264 - Manual (Page 12)

Paging Interface Adapter
Contact Input Screen
All contact programming is accomplished on the Master Unit.
Any field not filled in will be disregarded
Contact Input Programming
Each contact input can be programmed for individual messages for each state. The user can
select the type of input, Voltage or Non-Voltage and normal state of that contact. Each PIA is
shipped with 16 inputs standard, upgradeable to a total of 64 in blocks of 4. The unit can be
set for all voltage or all dry (no voltage). In addition the inputs can be divided into voltage and
dry inputs. If the unit is divided voltage and non-voltage, it must be in blocks of 4.
Example. 1-4 Voltage, 5-8 Dry.
12