WaveWare comPPage PIA-3264 - Manual (Page 7)

Paging Interface Adapter
DEFAULT USER ID and PASSWORD
The unit is shipped with a default log on User ID and Password. You should change the log on and
password before proceeding.
User Name: comppage
Password: pia3264
CHANGING USER ID and PASSWORD
1. Connect the PIA to a stand alone PC using the supplied Network Cross Over cable or connect to
your network hub using the supplied Network Patch cable.
2. Apply power to the PIA and turn on unit, the RED power light will illuminate.
3. On the PC Internet Explorer Browser address line, enter the Paging Interface Adapter IP
Address.
The IP address can be found on the main board.
4. The following screen will appear.
5. Enter the default User Name and Password.
6. Click on OK.
7. The Global Setting screen will appear.
8. Select the Change Authentication Settings button at the bottom of the screen.
9. The Change UserID/Password will appear.
10. After entering your new information, select Set New Auth.
11. The new information will be effective the next time you log onto the PIA3264.
12. Save this information in a secure place. If it is lost there is NO way to log onto the unit.
7