WaveWare comPPage PIA-3264 - Manual (Page 16)

Paging Interface Adapter
16
9. Select Save Zone to -
a. Enter the range of zones on the unit you are programming.
Ie.. 1 to 24. This will write data to only the contact you will be using.
b. This will write the data to memory and refresh the screen.
c. Enter the range of zones on the Slave unit that will be attached.
10. Editing Default file using FIND ZONE
a. In the box next to Fine Zone, enter the number of the contact you want to
edit.
11. Select Fine Zone.
12. The zone information for the zone you entered will appear. You can now make
changes.
13. Editing Default file using Prev or Next
a. In the box next to Fine Zone, enter the number of the contact you want
to edit.
b.. Select Fine Zone.
14. The zone information for the zone you entered will appear. You can now make
changes.
15. Select Next to display the next input to be programmed
a. Continue until all inputs have been programmed.
Function Buttons Page Two
1. PREV Go back to the previous input zone.
2. NEXT Move to the next input zone.
3. SAVE ZONE Save all data to memory.
4. PRINT DATABASE Print a record of all information in current file.
5. PRINT ALARM LOG Select and Print a specific alarm log.
System stores 30 days of logs.
6. FIND ROOM Search feature, displays data for the room number entered.
7. FIND ZONE Search feature, displays data for the zone number entered.
8. SAVE TO ZONES Save displayed data to all zones entered.
When all programming is complete, select [PRINT DATABASE]. Retain this copy and
place a copy with the unit for any future questions or changes.