wePresent MirrorOp User Manual
Page 5
Selecting Receivers
!
When entering MirrorOp Presenter, the app would pop up a message asking if
you want to connect to a receiver. Select a receiver from the discovered receivers
list, or press the MENU key to manually enter the IP address of the receiver if
the receiver you want to connect to is not automatically discovered.
You can drag down to refresh the list if you want the app to search for receivers
on the network again.
!
If you want to skip this step for now, you can click "Cancel" on the message.
Later on when you want to connect to a receiver in the app, you can click the
receiver icon on the upper-right corner to bring up the receivers list.
!
When connected to a receiver, the receiver icon turns green.
"5
MIRROROP PRESENTER USER’S MANUAL