AGI Security SYS-HC0451 Standalone DVR Quick Start Guide User Manual

Page 14

Advertising
background image

10

Move you mouse to the top centre of the video of current channel, you can see system pops
up the preview control interface. See Figure 2-3. If your mouse stays in this area for more
than 6 seconds and has no operation, the control bar automatically hides.

Figure 2-3

You can refer to the following sheet for detailed information.

SN

Name

Function

1

Realtime playback

It is to playback the previous 5-60 minutes
record of current channel.
Please go to the Main Menu->Setting->-
>System->General to set real-time playback
time.
System may pop up a dialogue box if there is no
such record in current channel.

2

Digital zoom

It is to zoom in specified zone of current
channel. It supports zoom in function of multiple-
channel.

Click button

, the button is shown as

.

Drag the mouse or use the middle button to
select a zone, you can view.
Right click mouse to cancel zoom and go back
to the original interface.

3 Real-time

backup

function

It is to backup the video of current channel to
the USB device. System can not backup the
video of multiple-channel at the same time.

Click button

, system begins recording. Click it

again, system stops recoridng. You can find the
record file on the flash disk.

4 Snapshot

Click

to snapshot once. The snapshot file is

saved on the USB device or HDD. You can go to
the Search interface (chapter 2.5) to view.

5

Mute

Click to mute. Click again to enable audio
function when preview.
Please note this function is for one-window
mode only.


Playback control
The playback control has the following features.
z

Support play, pause, and exit and drag function.

z

During the preview playback process, you can not see the channel title and record status

of current channel. It will display the channel title and the record status once you exit the
preview playback.

z

During the preview playback, you can not switch the displayed channel or change

current window-display mode.

z

System closes preview control interface when you are switching split mode.

z

Please note the tour function has the higher priority than the preview playback. You can

not control the preview playback until the tour function ended.

1 2 3 4 5

Advertising