Argox G-6000 User Manual
Page 17
Hooking up the Printer & Computer
Communicate with the Printer
Connecting the Printer to Your Host
Communicate with the Printer
1. You can connect the printer with any standard Centronics cable to
the parallel port of the host computer.
The bundled printer driver can be applied to all the applications under
Windows
XP/2000/98, and Windows NT. Through this driver you may run
any popular software applications e.g. MS-Word and print out the
contents by this label printer as long as they are for Windows.
2. Alternatively you can connect the printer with a serial cable to the
RS232C port of your computer or terminal. (for PC compatibles, the
RS232C port is COM1, COM2 or COM3.)
Before installation
1.
Check the contents of the driver to ensure it is complete.
Note :
2.
Make a backup copy of this driver.
Using Centronics allows for a much higher communication speed than
the use of a serial.
3.
Read the README.TXT file for installation guide and change notices.
Centronics
PC
PC
RS232 Serial
Port
34
33