ARRIS DCX3300 User Guide - Manual (Page 13)

Operation
B
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
4
365-095-14427 x.2
2
Operation
Turning Power On and Off
Press power on the front panel or remote control to turn the set-top on or off (standby).
When using the remote control, be sure it is in cable mode by pressing cable before
pressing power.
Changing Channels
You can change channels in three ways:
•
Press channel + or – on the remote control to step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press volume + or – on the remote control to adjust the volume. When you adjust the
volume, the volume scale is displayed on the screen. Press mute on the remote control
to toggle the sound on and off.
For best audio quality when using the analog L/R (var.) volume controlled audio outputs,
use the remote control to set the set-top to approximately three quarters of the
maximum volume level and then adjust the audio levels on external devices such as your
TV or A/V receiver.
When using any of the digital audio outputs (HDMI, IEEE-1394 (DCX330 and DCX3300-M
only), optical or coaxial digital audio) adjust the audio levels on your external device such
as your TV or A/V receiver. You may also be able to program your remote to control the
volume of your TV or A/V receiver directly (refer to the remote control instruction
manual).
Interactive Program Guide
The Interactive Program Guide (IPG) displays information about TV programs and enables
you to access features such as Parental Control or Pay-Per-View. Interactive program
guides can vary with each cable service provider. Refer to the Interactive Program
Guide’s instruction manual for detailed instructions.