ARRIS DCX3300 User Guide - Manual (Page 19)

Connecting Your Set-top
B
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
10
365-095-14427 x.2
On-screen graphics will not be displayed when you are using the IEEE-1394 connection
on the rear panel of the set-top. Refer to Section 6, On-Screen Graphics, for more
information.
If your TV has a DVI input, connect a HDMI-to-DVI adapter or cable to the HDMI out
connector on the set-top and the DVI HDTV connector on your TV.
Note: DVI does not provide audio. A separate audio connection must be made.
Component video (YPbPr) — HDTV and SDTV
The YPbPr connectors on your set-top provide HDTV and SDTV component video.
Note: Component video does not provide audio. A separate audio connection must be
made.
Composite Video — SDTV
If a component video input is not available on your TV, use the composite video (video)
connection.
Note: Composite video does not provide audio. A separate audio connection must be
made.
Connecting HDTV — Single Connection for Video/Audio
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
set-top.
HDMI
If your TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on your
set-top.
IEEE-1394
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your
video and audio connection. Connect an IEEE-1394 cable to the IEEE-1394 connector on
your HDTV and set-top.
Note: On screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the set-top. Refer to Section 6, On-Screen Graphics, for
more information.
If you have an audio/video receiver and are not using your TV’s speakers, go to
Connecting Your set-top to an A/V Receiver – Audio.
Note: IEEE-1394 is available with the DCX3300 and DCX3300-M only.