ARRIS DCX3300 User Guide - Manual (Page 47)

Configuring A/V and Closed Captioning
B
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
38
365-095-14427 x.2
Setting Description
Dolby Volume The Dolby Volume setting is used to control the Dolby Volume feature of the
DCX3300. The default setting is Off. The options are used as follows:
• Off – The Dolby Volume feature is turned off and the output volume may
fluctuate during commercials or when changing channels.
• On – The Dolby Volume feature is turned on and the DCX3300 will maintain
a more consistent output volume regardless of the channel or program
being viewed.
Note: Only 2-channel output is volume leveled (Audio L/R). HDMI and S/PDIF
can be leveled if in an L-PCM output mode. Audio that is output as Dolby
Digital or native/compressed format is not volume leveled.
Video
Sharpness The Video Sharpness setting allows you to adjust the picture sharpness when
viewing a standard definition (SD) program on the DCX3300. The Video
Sharpness setting affects the HDMI and Component Video (YPbPr) outputs.
By default, the sharpness level of 3 is selected.
The DCX3300 supports five distinct levels of analog video picture sharpness. A
value of 1 corresponds to a “softer” picture while a value of 5 corresponds to
a “sharper” picture.
The best sharpness setting depends upon the video connection being used,
the display quality of the TV, and your own personal preference.
Return To Main
Menu Selecting this option will return you to the User Settings Menu main screen.
Restore Default
A/V Settings To reset all of the Advanced Audio/Video settings to their default values,
navigate to this option and press the
► key.