12 enable payload control command, 13 disable payload control command, Table 7-42 – Artesyn ATCA-7368 Installation and Use (June 2014) User Manual
Page 139: Enable payload control command description, Table 7-43, Disable payload control command description, Supported ipmi commands
Supported IPMI Commands
ATCA-7368 Installation and Use (6806800M12D)
139
7.5.12 Enable Payload Control Command
The Enable Payload Control command enables payload control from the serial debug interface.
7.5.13 Disable Payload Control Command
The Disable Payload Control command disables payload control from the serial debug
interface.
Table 7-42 Enable Payload Control Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00
Table 7-43 Disable Payload Control Command Description
Type Byte
Data
Field
Request Data
1:3
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 1 = 0A, byte 2 = 40, byte 3 = 00
Response Data
1
Completion Code
2:4
PPS IANA Private Enterprise ID
0x00400A = 16394 (Pigeon Point Systems)
LSB Byte first: byte 2 = 0A, byte 3 = 40, byte 4 = 00