Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 80)

Controls, LEDs, and Connectors
CPCI-6200 Installation and Use (6806800J66E) 80
3.6 Status Indicators
The CPCI-6200 provides four front panel status indicators as well as multiple planar status
indicators that are used for general board function status and Ethernet link/speed/activity
status.
Table 3-19 CPCI-6200 Status Indicators
Function Location Label Color Description
Board Fail/User 1 Front panel User / Fail Orange This indicator lights up during a
hard reset and remains lit until
software turns it off.
User 2 Front panel User / Fail Green This LED is completely user
programmable.
TSEC1 Link/Speed Front panel ENET 1 SPEED Off No link
Yellow 10/100 BASE-T operation
Green 1000 BASE-T operation
TSEC1 Activity Front panel ENET 1
ACT Off No activity
Blinking Green Activity is proportional to
bandwidth utilization.
TSEC2 Link/Speed Front panel ENET 2 SPEED Off No link
Yellow 10/100 BASE-T operation
Green 1000 BASE-T operation
TSEC2 Activity Front panel ENET 2
ACT Off No activity
Blinking Green Activity is proportional to
bandwidth utilization.
TSEC3 Link/Speed Onboard Yellow - D31
Green - D32 Off No link
Yellow 10/100 BASE-T operation
Green 1000 BASE-T operation
TSEC3 Activity Onboard D28 Off No activity
Blinking Green Activity is proportional to
bandwidth utilization.