Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) - Manual (Page 67)

Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49E) 67
<Value>Monitor ID</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the Start-monitor command arguments.
Table 4-20 start-monitor
Argument Data Type Description
Monitor ID Integer Type the unique ID of the monitor that you want to
start.
Dev Instance Enum Use list-device-instances command to get the
equivalent enumerated value of supported device
instance.
4.4.6 set-lower-threshold-info
set-lower-threshold-info
command is used to set the lower threshold value for a
particular monitor based on which the monitor performs.
Syntax for CLI
set-lower-threshold-info monitorId < Monitor ID> deviceInstance
<Dev Instance> lowerThreshold <Threshold Value>
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>vee0-{Dev Cat}</Name>
</Object>
<Method>setLowerThresholdInfo</Method>
<Argument>
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>