Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) - Manual (Page 69)

Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49E) 69
<Argument>
<Name>deviceInstance</Name>
<Value>Dev Instance</Value>
</Argument>
<Argument>
<Name>monitorId</Name>
<Value>Monitor ID</Value>
</Argument>
<Argument>
<Name>upperThreshold</Name>
<Value>Threshold Value</Value>
</Argument>
</InvokeMethod>
</Script>]]>]]>
The following table provides the set-upper-threshold-info command arguments.
Table 4-22 set-upper-threshold-info
Argument Data Type Description
Monitor ID Integer Type the unique ID of the monitor for which you want to
set the upper threshold value.
Dev Instance Enum Use list-device-instances command to get the
equivalent enumerated value of supported device
instance.
Threshold Value Integer Type a threshold value for the specified monitor ID.
4.4.8 set-threshold-default
set-threshold-default
command is used to reset the threshold value to default value of
a particular monitor.
Syntax for CLI
set-threshold-default monitorId <Monitor ID> deviceInstance <Dev
Instance>