14 show-networkcounter-log, 15 show-networkerror-log, Table 4-28 – Artesyn ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) User Manual
Page 76: Show-rate, Commands execution
Commands Execution
ViewCheck on ATCA-7470/7475 Installation and Use (6806800S49E)
76
The following table provides the show-rate command arguments.
Table 4-28 show-rate
Argument
Data Type
Description
Monitor ID
Integer
Type the unique ID of the monitor of which rate of
change value is to be shown
Dev Instance
Enum
Use list-device-instances CLI command to get
the equivalent enumerated value of supported Device
Instance
4.4.14 show-networkcounter-log
show-networkcounter-log
command displays the list of network counters on devices
that have crossed the maximum rate value. For more information on command, rate, refer
.
Syntax for CLI
show-networkcounter-log
Syntax for XML
<Script>
<InvokeMethod>
<Object>
<Class>deviceCategory</Class>
<Name>vee0-{Dev Cat}</Name>
</Object>
<Method>showNetworkCounterLog</Method>
</InvokeMethod>
</Script>]]>]]>
4.4.15 show-networkerror-log
show-networkerror-log
command displays the list of network errors on devices that
have crossed the maximum rate value. For more information on command, rate, refer